Adhesive, Sealant and Lubricant
REIFF provides a full range of Henkel Loctite, Epple adhesive and sealants, Technicoll adhesives, Wacker Silicone, Sika Sealants, OKS Lubricants, Tesa Tapes and other high quality German products.
Product Catalog
Adhesive, Sealant and Lubricant
Official Henkel distributor both in Germany and China
Henkel Loctite is a leading global supplier in the field of adhesives, sealants and functional coating materials. With official authorization from both Henkel Germany and Henkel China, REIFF is an important partner of Henkel General Industries. REIFF offers Chinese customers a full range of Henkel products and optimized supply channels.
Exclusive Technicoll Distributor for Chinese market
Technicoll adhesives have a wide range of applications in large area bonding of plastic, metal, foam material, textile, leather, rubber, ceramic and insulator.
Official Wacker distributor in Germany
Project Authorization in China
The organic silicone products from Wacker are renowned throughout the industry for its diversity and outstanding performance, and are widely used in the automotive, electronics, consumer electronics, telecommunications and semiconductor industries.
Exclusive Epple Distributor for Chinese market
Epple products are resistant to chemical erosion, including acids and alkalis, and are also highly heat resistant, withstanding temperatures of up to 800°C. Epple sealants can achieve reliable sealing results in varying temperatures and chemical corrosion conditions. The full range of Epple products are silicone-free and widely used in the fields of coating, chemical and automobile industries.
Anaerobic adhesives

Anaerobic adhesives are single-component adhesives which harden at room temperature without exposure to oxygen.

Screw locking adhesives
Screw locking adhesives are an alternative to traditional mechanical locking. They are more effective and easier to disassemble. The common loosening of bolts, screw locking and corrosion can be prevented, which results in significant improvements in efficiency and reduces the maintenance costs. Through this way, the preload can be better maintained and the loosening caused by vibration and collision can be prevented. Screw locking adhesives also have better penetration and gap filling than traditional methods, resulting in a longer lasting locking effect and more effective protection against corrosion.

Loctite 221

Loctite 243

Retaining compound
Retaining compound adhesives are used for the installation of precision components, such as the assembly of bearings, bushings and splines in the place of housing or shaft. They have the ability to transfer loads to a large extent and to distribute them evenly, effectively avoiding friction and corrosion. The adhesives should be applied in a liquid state, the bonding surface 100% evenly smeared, and the retaining compound should fully fill the gaps between the components and then it will solidify into shape.

Loctite 603

Loctite 641

Structural bonding

It is mostly used for the bonding of engineering structural parts, which can withstand many stresses within a rated time without being damaged. Mainly used for the bonding of stressed structural parts, able to withstand large loads, still has good mechanical strength at working temperatures above normal temperature, and has resistance to chemicals, other media and ageing.

Cyanoacrylate (instant) adhesives
They can be cured very quickly on the surface of the bonding material. Moisture on the surface of the substrate can trigger the curing reaction of the adhesives, which proceed from the surface of the substrate to the middle of the adhesives. Instant adhesives are widely used for bonding small parts that require quick fixation. Due to their limited gap filling capacity, therefore a close fit to the bonded surface is required during the bonding process. They have very good adhesion to most substrates and are excellent in terms of shear and tensile strength.

Loctite 401

epple-Bond 8212

Acrylate adhesives
Acrylate adhesives are mainly used in high loading environments as an alternative to traditional mechanical joining methods. The workpieces bonded with acrylics provide higher strength, shear rigidity and overall firmness.

SikaFast®-5215 NT

Loctite AA 3038

Epoxy resin adhesives (Hysol adhesives)
Epoxy resin adhesives are mainly used in high loading environments as an alternative to traditional mechanical joining methods. The epoxy resin adhesives provide higher strength, shear rigidity and overall firmness to the workpiece. They are often used in industries that require better product performance, such as space launching and automobile.

Loctite E-20HP

Loctite E-120

Solvent sensitive adhesives
Solvent sensitive adhesives are applied by brush or spatula, and are applied on the two contact surfaces which need bonding and the operation is started after the solvent evaporates. Once the two contact surfaces have been bonded, they have a good initial viscosity and no further corrections can be made to the bond. It takes a while for the solvent to evaporate completely.

TEROSON 2444

technicoll® 8055

Elastic adhesives and sealants

Elastic adhesives are mainly used to absorb or compensate for dynamic loads. The adhesive has a high intrinsic strength (cohesion) and a relatively high modulus, and after curing possesses elastic properties will at the same time have a high connection strength.

Silicone rubbers
Silicone rubbers form a rubbery, high-performance elastomer under the influence of temperature through water molecules in the air (single-component) or mixed with other components (two-component), in order to flexibly achieve the effect of bonding or sealing.

Wacker E43

TEROSON® SI 33

Polyurethane
Polyurethane adhesives are superior in performance to traditional single-component adhesives, which hardens to form an elastomer in the presence of humidity. Depending on the formulation, the hardness of the polyurethane can be flexibly adjusted from soft to hard to meet different application scenarios. High bonding strength, flexible application in all gaps, wide adhesive spectrum, excellent corrosion resistance.

Sikaflex 252

TEROSON PU 92

MS polymer adhesive and sealant
A single-component product based on MS polymer which hardens into a high-performance elastic product in the presence of humidity. The composition comes with a catalyst, without primers and is suitable for most substrates.

TEROSON MS 939

UHU POLY MAX EXPRESS

Sealants

Sealants are used between different substrates, for example between flanges, shafts, threads or gaps. They can be in the form of a paste or a liquid, some of which remain in their original liquid state after application to the workpiece and some of which need to be cured before they have a sealing effect.

Flange sealing
Flange sealants are used, for example, for sealing flange surfaces. The sealed area is continuously protected against the ingress of liquids or gases and is unaffected by changes in the operating environment of the equipment, such as temperature and pressure.

epple 22

epple 33

Thread sealants
Thread sealants act in the space between the threads to prevent corrosion caused by the ingress of gases or liquids. There is often a pressure difference between the two sides of the thread sealants and when fully cured the sealants can withstand the extreme burst pressure of the pipe.

Loctite 511

epple 37

Elastic and plastic sealants
The sealing of the joints requires excellent elasticity and temperature resistance, especially when the entire workpiece is subjected to wide temperature changes, impacts and vibrations. Sealants will deform when subjected to forces, and if it is sensitive to deformation, plastic sealants are a better choice.

epple stucarit 309

epple 28

Lubricants

Oil
The oil has excellent thermal conductivity and also has excellent liquidity and permeability, making it an excellent choice in high temperature environment or high-speed environment. Common application scenarios are for example in the powertrain, chains, bearings, hydraulics or compressors.

OKS 3570

OKS 8601

Grease
Grease is made by adding a thickener to the base oil to provide better adhesion to the part to be lubricated and to provide continuous lubrication, while also preventing external moisture and impurities from outside. It is usually used in bearings, rotating bodies, valves, guide rails, chains, etc.

OKS 480

OKS 1110

Paste
Paste is similar to grease but has a higher proportion of solid content and has better lubrication, sealing and corrosion protection for extreme temperatures, pressure changes or highly corrosive media.

OKS 250

OKS 240